BFC-3BRLED-GMCSIER99-SM
Free Shipping witihn lower 48 states
International Buyer: Shipping charge does not included Custom Charge and Brokerage Fee (Detail)
California's Prop 65 Warning: Click Here for Detail
BuildFastCar Site will be Close 5/22/23 to 6/2/23. Any orders received within this time frame will be promptly processed and shipped out the following week, from 6/5/23 to 6/9/23.
LED third brake light is a quick and simple way to upgrade the look of your pickup truck. When turned on, the bright LEDs (Light Emitting Diodes) shine up to ten times brighter than standard light bulbs. Even when the brake is not depressed, the integrated cargo light (if equipped) gives off plenty of white light to view your gear in the truck bed. The LED third brake light has a durable polycarbonate lens with a free form reflector and is available in Clear or custom Smoked.
Application:
For 1999-2006 Chevrolet Silverado 1500
For 1999-2006 Chevrolet Silverado 2500
For 1999-2006 Chevrolet Silverado 3500
For 2001-2006 Chevrolet Silverado 1500 HD
For 2001-2006 Chevrolet Silverado 2500 HD
For 2001-2006 Chevrolet Silverado 3500 HD
For 2007 Chevrolet Silverado 1500 Classic
For 2007 Chevrolet Silverado 1500 HD Classic
For 2007 Chevrolet Silverado 2500 HD Classic
For 2007 Chevrolet Silverado 3500 Classic
For 1999-2006 GMC Sierra 1500
For 1999-2004 GMC Sierra 2500
For 2001-2006 GMC Sierra 3500
For 2001-2006 GMC Sierra 1500 HD
For 2001-2006 GMC Sierra 2500 HD
For 2007 GMC Sierra 1500 Classic
For 2007 GMC Sierra 1500 HD Classic
For 2007 GMC Sierra 2500 HD Classic
For 2007 GMC Sierra 3500 Classic
Remark:
Installation: The smoke lens will reduce light bulb brightness about 30%.
Product Content:
The product does not come with manual/instruction, Professional Install Recommended
Cross Reference Number:
Cargo Light Function Note:
Should your vehicle is NOT equipped with a Cargo Light function but you still
wish to install?
You may experience the Cargo Light staying on ALL THE TIME. If you do experience
this issue, there are two modifications that may be performed
1. Disable the Cargo Light Function. This can be done by cutting the white 12v
Cargo Light power wire. If this is method is chosen it is recommended to cover
the wire end with heat shrink tube, wire nuts or electrical tape.
2. Add a switch and run a 12v power wire from your dash to the LED Brake Light.
This is will also require cutting the white 12v Cargo Light power wire. Again
please cover the plug side of the led wire to prevent electrical issues.
Prior to installation please verify the following:
1. Inspect back circuit board and wire connections